Order your Flute Master and accessories for next day shipping
The Flute Master and Spiral Master work together to provide almost unlimited capabilities to cut spiral flutes and reeds, following the profile of your turning. Spirals can turn clock-wise or counter clock-wise or both.
Lathes from 12 to 25 inch capacity are supported. You are only limited by the length of your lathe.
Order the two tools together for a $20.00 saving.
The Flute Master makes it possible to cut flutes on straight and curved profiles without the need of guides.
Flute Master fits lathe sizes from 12 to 25 inch capacities. It is used with either electric or air-driven cutting tools (not included).
Accessories of stop blocks, index wheel, index wheel pin holder, tool holder and depth guide are included.
Foredom, Mastercarver and Wecheer routers, and Ridgid 2401 and Trend T4 routers are supported.
The Spiral Master is used with the Flute Master to cut flutes and reeds in clock-wise or counter clock-wise direction or both on the same turning. The Spiral Master follows the profile of your tuning.
The 1 inch x 8 thread per inch spindle and Morse Taper are stainless steel. Four bearings allow the spindle and Morse Taper to revolve independently until pinned into the included 1 inch x 8 threads per inch index wheel.
The Spiral Master can only be used with the Flute Master. Parts are assembled and included.
Different profile router bits can be used that have a 1/4 inch shaft.
Optional multi-sprocket adds 6 and 9 inch pitch spirals to the 12 inch pitch that come with the Spiral Master. Four set screws attach it to the Morse Taper end of the housing. Set screws are included.
The new tool holders include a micro adjustment for the depth of flutes, controlled by 2/1000 of an inch for each click of the depth control. Specify your choice of Ridgid 2401 router, Trend T4 router, or for the Foredom, Mastercarver or Wecheer drill.
These tool holders can be ordered separately if you have an older model Flute Master.
These tool holders are used for both the Flute Master and Spiral Master.
The Index Wheel Pin Holder is used with any lathe size from 12, 16, 20, 24 and 25 inch capacities.
Index wheels provide more options for the number of flutes desired.
The 1 inch x 8 threads per inch index wheel is included with the Spiral Master. If ordering for the Flute Master, specify your lathe model so the correct size index wheel can be shipped.
Set of six carbide router bits and includes large Proximity depth guide.
Core Box bits of 1/4, 1/2 and 5/8 inch widths.
Barley Twist bit of 3/4 inch width.
Pointed round-over bits of 1/2 and .375 inch widths.
Index wheels provide options for variations of 60, 48, 36 and 14 index divisions.
Order the index wheel pin holder to lock the lathe for each cut.
Specify the lathe chuck size of your lathe: 1 or 1 1/4 inch, or 34 mm metric.
Stop Blocks are used to control the beginning and ending of each flute. They fasten to the bed of the lathe.
A pair of stop blocks is included with the purchase of the Flute Master.
Copyright ©2018 Flute Master Tools For Woodturners. All rights reserved. Sitemap.